DuctQuote Update Sept 2026 | US Duct

Table of Contents

DuctQuote keeps improving based on how dealers actually use it in the field — not on a marketing wishlist. This month's update tightens up bill-of-materials accuracy, smooths out several rough edges in the 3D modeling experience, and speeds up project management. Here's what changed.

Bill of Materials Accuracy

A BOM you can't trust is a BOM you have to double-check by hand, and that costs time on every quote. Two fixes close that gap this month:

• Flanged pipe BOM counts were corrected so every physical flanged piece is now counted.

• Four 3-inch US Tubing 45-degree elbows were corrected.

Smoother 3D Modeling

Most of this month's work went into cleaning up the modeling experience itself — the small friction points that slow a dealer down mid-build.

• 3D models now load more reliably and keep their saved height.

• Locked models stay locked after saving and reopening. Copied models can be locked independently.

• Clicking a model while it's still loading now places it exactly where you clicked.

• Canceling or deleting a loading model no longer leaves a ghost model or an invisible selection box behind.

• “Place on Floor” keeps the model selected with its movement handles visible, so you can keep adjusting without reselecting.

Faster, Safer Project Management

Two changes that make day-to-day project handling more reliable:

• Project searching was made safer, including searches containing apostrophes.

• Layout order numbers now load more efficiently.

DuctQuote is free for dealers and resellers, and training is included. If you haven't set it up yet, now's a good time to get started.

Learn About DuctQuote

Contact Us

— The US Duct Team

A Contractor’s Checklist for Successful Dust Collection Installations
Nov 12, 2026

A Contractor’s Checklist for Successful Dust Collection Installations

Most dust collection callbacks don’t come from bad equipment. They come from small misses, like a measurement nobody checked, a short shipment, or a branch line that went in without a velocity reading. This field-ready checklist takes contractors through each phase of a dust collection install. It starts with the site walk before mobilizing and the receiving checks at the dock. It then covers support spacing, seating gaskets, gating branches, startup static pressure and velocity readings, and closeout documentation. It also lists the four most common installation missteps and explains how clamp-together duct helps crews install faster and adjust in the field without welding.
Oct 22, 2026

Battery Manufacturing Dust Collection: Design Considerations | US Duct

Battery manufacturing requires dust collection systems engineered for fine powders, leak-free containment, and combustible dust safety. Discover the key design considerations for airflow, ductwork, and system flexibility to help protect product quality, improve performance, and support safer operations.
Oct 15, 2026

DuctQuote Update Oct 2026

DuctQuote’s October 2026 update focuses on small fixes that save time across a working day. Dealers can now rename models in 3D layouts so equipment is easy to identify. DXF exports get unique filenames and smaller file sizes. Project notes can be viewed and added directly from Edit BOM. The Edit BOM and Knowledge Center grids now keep your scroll position, selections, and collapsed groups when data refreshes.

Talk to a Duct Guy or Gal

Get started on a solution tailored to your needs, or explore our range of inline separators, self-dumping hoppers, and baghouses for even more ways to optimize your workspace.