US Duct now offers select products for purchase online, giving dealers, contractors, engineers, and facility teams a faster way to order commonly needed industrial ductwork and waste collection items.
Strong stainless steel quick clamps with integrated EPDM gasket for clamp-together dust collection duct. Compatible with the following standard, heavy-gauge, and airtight duct systems:
PROTAPE® PUR 330 AS is a lightweight, microbe-resistant, flame-retardant flex hose built for conveying gases along with abrasive dust, powders, and fibers. Constructed from ester-polyurethane reinforced with a spring steel wire helix, it's highly flexible and compressible at a 3:1 ratio, making it easy to route around equipment and through tight runs. Its permanently antistatic wall (in accordance with ISO 8031) makes it a dependable choice for explosion-hazard areas and static-sensitive operations.
This versatile hose suits extraction systems, dust collection and filtration equipment, oil mist extraction, and extraction arms. It's commonly used on printed circuit board drilling machines, vapor return lines, paint and spray mist extraction, textile fiber extraction, and ventilation systems for barns, clean rooms, and semiconductor production. It also performs well in surface-prep operations such as shot blasting, shipyard work, stripping, floor preparation, and grinding, and can serve as an exterior protective hose in heating applications.
Features
Flange Adapters let you switch between flanged duct and clamp-together duct in one fitting. A flange on one end bolts to your existing flanged duct, equipment ports, or any component with a companion flange, while the other end drops straight into your clamp-together run. It's the bridge between two duct systems, letting you tie modern ductwork into existing flanged lines without reworking the whole system.
Features
Hose Adapters connect your ductwork to flexible hose in dust, mist, and fume collection systems. One end is a raw end sized to the inside diameter (ID) of your hose, with an expanded bead knurled onto the adapter. That bead keeps the hose from sliding off and gives you roughly 2 inches of adjustability to fine-tune the fit. It's a fast, reliable way to transition from rigid duct to flex hose, and just as easy to take apart for cleaning or relocation.
Features
End dragging or kinked flex hose connections on cutter heads and other moving equipment by installing a Ball Joint. The base swivels a full 360 degrees, letting the hose move freely above the machine while airflow stays steady. It's the simple fix for flex hose that keeps binding, sagging, or wearing out where your equipment moves, and it pairs well with swivel joints for even greater range of motion.
Rolled-lip end that connects to Quick Clamp Clamp-Together Duct (CTD) using quick clamps and gaskets, while the hose side connects in minutes with a simple worm clamp (not included). Fast to set up, easy to adjust, and quick to take apart for cleaning or relocation.
Features
Full Cut-Off Gates let you balance your system and direct airflow exactly where it's needed. The blade slides smoothly in and out of the air stream to fully cut off the air or partially throttle a duct, and a locking thumb screw holds it in any position from wide open to fully closed. It's the simple way to fine-tune suction across individual drops.
Durable cast-aluminum body with rolled-lip ends that connect to Quick Clamp Clamp-Together Duct (CTD) using quick-fit clamps and O-rings.
Features
Segmented, or gored, Elbows deliver smooth, sweeping directional changes for larger-diameter dust collection and ventilation lines. Built with a 1.5D centerline radius (the radius equals 1.5 times the duct diameter), they create a gradual turn that keeps airflow moving efficiently and reduces abrasion from high-velocity chips and dust, making them ideal for main lines and larger drops.
Route your system, change direction, or reconfigure a run in seconds, and just as easily take it apart for cleaning or relocation.
Features
Stitch-Welded Elbows deliver tight, precise directional changes for dust collection and ventilation lines. Each fitting is pressed from two metal half-shells and joined by a stitch weld down the seam, creating a factory-sealed turn that holds up in demanding systems. Built with a 1.5D centerline radius (the radius equals 1.5 times the duct diameter), making them ideal for main lines and larger drops.
Route ductwork around obstacles, change direction, or reconfigure a run in seconds, and just as easily take it apart for cleaning or relocation.
Features
Floor Sweeps remove debris from the shop floor wherever cleanup is needed. Just open the double-hinged door and sweep shop debris away. When you're done, the dust collection system's vacuum holds the door tightly closed to prevent system pressure loss. An integral “foot-push” tab allows hands-free operation, so you can keep sweeping while the door opens for you. Commonly known as a Floor Hood or Dust Nozzle, it's an easy addition to any dust collection setup.
Features
Step a larger-diameter duct down to a smaller one with a smooth, tapered Reducer that keeps airflow moving efficiently through the size change. Built for modular dust collection and ventilation systems, it installs in seconds and just as easily comes apart for cleaning, resizing, or reconfiguring a run.
Whether you're tying a main line into a smaller drop or matching a machine port to your existing duct, a reducer keeps the transition clean and the airflow smooth.
RR05.G18: steps a 5-inch duct down to a 4-inch connection
RR06.G18: steps a 6-inch duct down to a 4-inch connection
RR06.G18: steps a 6-inch duct down to a 5-inch connection
RR08.G18: steps an 8-inch duct down to a 6-inch connection
Features
Keep your shop cleaner and safer with a Radial Arm Saw Hood, an industrial ventilation fitting built to pull sawdust, chips, and fine particulate straight from the blade path of radial arm and beam saws. It directs high-velocity airflow tightly around the saw blade to trap heavy debris before it becomes an airborne hazard, and it unclips just as easily for cleaning, reconfiguration, or relocating your setup.
Features
Keep your Dustek dust collector running strong with a genuine Toshiba EQP Global SD severe-duty replacement motor, matched to your unit and built to drop in and perform like the original. This listing covers both Dustek lines; just select your model and horsepower:
Every motor in this range shares the same rugged severe-duty build: a heavy Grade 25 cast iron frame, bearing brackets, and conduit box; a totally enclosed fan-cooled (TEFC) enclosure that seals out dust and moisture; NEMA Premium efficiency; Class F insulation; a 1.15 service factor rated to 40°C ambient; and oversized 300-series bearings on both ends for long, reliable service. 230/460V, 60 Hz.
Features
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Disposable plastic collection bags for the Dustek DUSTY JR-31 dust collector. Collection bags catch chips and dust for fast, clean, no-mess changeouts.
***Sold in packages of 10.
Dustek aluminum impellers for the Classic Model dust collectors. Machined from high-quality 356-alloy aluminum. Dynamically balanced to eliminate vibration and heat-treated to T6 hardness for maximum strength and long service life.
Replacing a worn or damaged impeller restores your collector's original airflow and CFM performance.
Dustek steel impellers for the Whispurr Model dust collectors. Fully welded from heavy-duty steel as material-handling fan impellers. Built to exacting ISO-9001 quality standards and engineered for the ultra-quiet, high-volume Whispurr series for maximum strength and long service life.
Replacing a worn or damaged impeller restores your collector's original airflow and CFM performance.
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Maintain a secure seal around your Dustek dust collector’s motor shaft with this motor shaft gasket. It fits around the shaft opening to help reduce air leakage, limit dust intrusion, and support consistent dust collection performance.
Replace a worn, cracked, compressed, or missing gasket to help restore a proper seal between the motor shaft and housing.
Key Features
**Sold in pairs.
Dustek lower fabric collection bag for the DUSTY JR-31 mobile dust collector. The reusable lower bag mounts beneath the filter section to capture collected chips and dust, keeping the JR-31's self-contained, internal-return system running clean.
Durable knit polyester construction; secure it with a JR-31 quick-release strap (sold separately).
***Sold as pairs
Dustek upper cloth filter bag for the DUSTY JR-31 mobile dust collector. The upper bag filters exhaust air and returns clean, filtered air back into your shop. That is the heart of Dustek's internal-return design.
Made from seamless knit polyester for excellent filtration and airflow, with an elastic hem for a snug fit over the JR-31's upper frame.
***Sold in sets of 2.
Dustek quick-release strap for the DUSTY JR-31 mobile dust collector. The spring-loaded, over-center clamp locks the bag securely onto the JR-31's barrel and pops open with a single pull of the lever. No tools required.
A direct replacement for a worn, stretched, or missing strap so bags seal tight and swap out in seconds.
Approximately 8" diameter x 2" wide.
Dustek 01-020U 72-inch Cloth Filter Bag for use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.
Dustek 01-012 6 mil thick, heavy-duty, special polymer collection bag.
Roll of 50 Dustek 01-010 Plastic Collection Bags for Dustek or similar dust collectors with a 24″ diameter barrel.
These premium Dustek 01-018 48" Cloth Filter Bags are designed for use on Dustek Models 300 and 500 or any similar dust collector featuring a 24″ diameter barrel. Constructed from seamless knit polyester, these bags provide a high-efficiency solution for a wide variety of woodworking applications.
Note: Please see included instructions for the proper “coating” procedure to ensure maximum filtration life.
These premium Dustek 01-020 60" Cloth Filter Bags are engineered for high-capacity systems, including Dustek Models 750, 1000, and 1500, or similar dust collectors with a 24" diameter barrel. These bags provide the durability and airflow necessary for demanding industrial woodworking environments.
Pro Tip: For optimal performance, follow the included instructions for “coating” the bag before putting the system into full production.
These Dustek 01-022 96 Inch Cloth Filter Bags are engineered for the most demanding industrial applications. Designed for Dustek Models 2000 and 2500, or similar dust collectors with a 24"-inch diameter barrel. These bags provide the massive surface area required to maintain high-volume airflow in high-production woodworking environments.
Important Note: To ensure maximum filtration efficiency and bag life, please follow the included instructions for the “coating” procedure before initial use.
Dustek 01-034 60 Inch Teflon-Coated Filter Bags are for fine dust applications. For use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.
These 24-inch diameter special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.
The Dustek 01-036 96-inch Teflon-Coated Filter Bags are designed for fine dust applications. For use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.
These special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.
The Dustek 01-035 72-inch Teflon-Coated Filter Bags are designed for fine dust applications. For use on a Dustek or similar dust collector with a 24-inch diameter barrel.
These special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.
The Dustek "DUSTY" Model JR-31 (previously the JR-30) is a high-efficiency, mobile dust collection system engineered for professional versatility. Powered by a 3 HP, single-phase TEFC motor, this unit delivers a powerful 1,200 CFM suction capacity, providing an industrial-grade solution for shops requiring portability without sacrificing performance.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 3 HP, Single Phase (230V) TEFC / 3,450 RPM |
| Suction Capacity | 1,200 CFM |
| Impeller | 12″ Precision Balanced Steel |
| Filtration Rating | 30 Microns |
| Sound Level | 72 dB |
| Inlet Size | 6″ (Includes Triple Manifold) |
| Inlet Height | 12.5″ from floor |
| Storage Capacity | 24 Cubic Feet |
| Top Bag Length | 32″ |
| Weight | 185 lbs. |
| Dimensions | 22″ x 79″ x 61″ |
Professional Grade Features
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Magnetic controls with push-button start for Dustek Dust Collectors.
Available for all models!
Dustek Clamp-Type Strap to attach the upper cloth filter bag to Dustek (or similar) dust collectors with a 24-inch diameter barrel.
Features
Make dust collector bag changes faster and easier with Dustek Quick Release Straps. Designed to secure collection bags to the collector housing, these straps provide a snug hold while allowing quick, tool-free removal and installation.
Features
The Dustek Whispurr Model W2000 is an ultra-quiet, high-efficiency, self-contained internal return dust collection system built for serious production environments. Powered by a robust 20 HP, 3-phase Totally Enclosed Fan Cooled motor, the W2000 delivers a strong 7,000 CFM rating while keeping noise to a minimum—ensuring the internal electronics remain 100% dust-free for maximum service life. Proudly Made in America, the W2000 provides reliable suction and storage capacity for demanding daily manufacturing use.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 20 HP, 3-Phase (208-230/460V TEFC) |
| Sound Level | Ultra-Quiet "Whispurr" Design |
| Airflow Capacity | 7,000 CFM |
| Inlet Size | 14″ Diameter |
| Inlet Height from Floor | 81″ |
| Storage Capacity | 60 Cubic Feet (Total) |
| Filter Area | 210 sq. ft. |
| Weight | 1,600 lbs. |
| Dimensions | 42″ x 173″ x 149″ |
The "Whispurr" Advantage: Quiet, Efficient Performance
The W2000 features a dynamically balanced Whispurr impeller, engineered to move high volumes of air with minimal turbulence and noise. To optimize dust separation across its 4-bag filtration system, this model includes an External Adjustable Flange strategically installed between bags three and four to balance airflow.
What's Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Dustek Rubber Barrel Gasket.
Dustek Magnetic Clip assists with holding up collection bags during change-out.
The Dustek Whispurr Model W1500 is an award-winning, ultra-quiet industrial dust collection system designed for high-capacity production environments. Delivering a massive 5,000 CFM rating at a significantly reduced sound level of approximately 70 dB, the W1500 is powered by a 15 HP, 3-phase enclosed fan-cooled motor. It is the perfect solution for large facilities that require maximum suction without the deafening roar of a standard industrial collector.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 15 HP, 3-Phase (208-230/460V) |
| Sound Level | Ultra-Quiet (~70 dB) |
| Airflow Capacity | 5,000 CFM |
| Inlet Size | 14″ Diameter |
| Storage Capacity | 60 Cubic Feet (Total) |
| Filter Area | 132 sq. ft. |
| Weight | 1,500 lbs. |
| Dimensions/Footprint | 42″ x 137″ x 149″ |
The "Whispurr" Advantage: Maximum Scale, Minimum Noise
The W1500 utilizes a proprietary Whispurr impeller that is dynamically balanced to ensure smooth, vibration-free operation. This model also includes an External Adjustable Flange installed between bags three and four, allowing for superior airflow customization and efficiency across large ducting runs.
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Whispurr Model W1000 is an ultra-quiet industrial dust collection system designed for large-scale operations. Combining massive suction power with advanced noise-dampening technology, the W1000 delivers a powerful 4,000 CFM rating while maintaining a sound level near 70 dB. Powered by a 10 HP, 3-phase enclosed fan-cooled motor, it provides the ultimate balance of high-volume extraction and a quiet work environment.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 10 HP, 3-Phase (208/230v or 460/480v) |
| Sound Level | Ultra-Quiet (~70 dB) |
| Airflow Capacity | 4,000 CFM |
| Inlet Size | 12″ Diameter |
| Storage Capacity | 45 Cubic Feet (Total) |
| Filter Area | 100 sq. ft. |
| Weight | 1,250 lbs. |
| Footprint/Dimensions | 38″ x 125″ x 117″ |
The "Whispurr" Advantage: Heavy-Duty Power, Minimal Noise
The W1000 features the proprietary Whispurr impeller, dynamically balanced to eliminate the "industrial roar" typical of collectors in this power class. This award-winning design ensures that even at 4,000 CFM, your facility remains compliant with noise regulations and comfortable for your team.
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Whispurr Model W750 is an ultra-quiet industrial dust collector. Engineered to solve the problem of shop noise without sacrificing power, the W750 delivers a massive 3,000 CFM rating while operating at a remarkably low 70 dB. Powered by a 7.5 HP enclosed fan-cooled motor, it’s the premier choice for shops where communication and hearing safety are top priorities.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 7.5 HP (Available in 1-Phase or 3-Phase) |
| Sound Level | Ultra-Quiet (~70 dB) |
| Airflow Capacity | 3,000 CFM |
| Inlet Size | 12″ Diameter |
| Storage Capacity | 45 Cubic Feet (Total) |
| Filter Area | 100 sq. ft. |
| Weight | 1,150 lbs. |
| Footprint/Dimensions | 38″ x 125″ x 117″ |
The "Whispurr" Advantage: Performance Without the Roar
Unlike standard industrial collectors, the Whispurr W750 features a specialized "Whispurr" impeller and a redesigned internal return system that dramatically cuts decibel levels. This allows for a safer, more productive work environment where employees can hear one another while the system provides 24/7 high-efficiency filtration.
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Model C2000 is the ultimate high-capacity, self-contained internal dust collection system designed for heavy-duty industrial environments. Powered by a massive 20 HP, 3-phase enclosed fan-cooled motor, this unit delivers a market-leading 7,000 CFM rating, providing a high-volume extraction solution for large-scale manufacturing and 24/7 production facilities.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 20 HP, 3-Phase (208-230/460V) |
| Airflow Capacity | 7,000 CFM |
| Inlet Size | 14″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage Capacity | 60 Cubic Feet (Total) |
| Filter Area | 210 sq. ft. |
| Weight | 1,350 lbs. |
| Dimensions | 32″ x 173″ x 130″ |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Model C1500 is a high-capacity, self-contained dust collection system built for the most demanding industrial environments. Powered by a 15 HP, 3-phase enclosed fan-cooled motor, this unit delivers a massive 5,000 CFM rating, providing a high-volume extraction solution for large-scale manufacturing and commercial woodworking facilities.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 15 HP, 3-Phase (208-230/460V) |
| Airflow Capacity | 5,000 CFM |
| Inlet Size | 14″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage Capacity | 60 Cubic Feet (Total) |
| Filter Area | 132 sq. ft. |
| Weight | 1,250 lbs. |
| Dimensions | 32″ x 137″ x 130″ |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Keep your workshop clean, safe, and compliant with the Dustek Model C1000 Dust Collector. Engineered for heavy-duty industrial use, this self-contained internal return system delivers a massive 4,000 CFM of airflow. Powered by a 10 HP, 3-phase, enclosed fan-cooled motor, it’s the ultimate solution for large-scale woodworking and manufacturing shops needing reliable, continuous operation.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 10 HP, 3-Phase (208-230/460V) |
| Airflow Capacity | 4,000 CFM |
| Inlet Size | 12″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage | 45 Cubic Feet (Total) |
| Footprint | 24" x 125" x 97". Easily moved, minimal floor space required |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Model C750 is a high-performance, self-contained dust collection system engineered for efficiency in industrial environments. Powered by a 7.5 HP, 3-phase enclosed fan-cooled motor, this unit delivers a powerful 3,000 CFM rating, providing a heavy-duty solution for mid-to-large scale woodworking and manufacturing shops.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 7.5 HP, 3-Phase (208-230/460V) |
| Airflow Capacity | 3,000 CFM |
| Inlet Size | 12″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage Capacity | 45 Cubic Feet (Total) |
| Filter Area | 100 sq. ft. |
| Weight | 950 lbs. |
| Footprint | 24″ x 125″ x 97″. Easy to move around your shop! |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Model C500 is a high-performance, self-contained dust collection system engineered for efficiency in professional industrial settings. Powered by a 5 HP, 3-phase enclosed fan-cooled motor, this unit delivers a consistent 2,000 CFM rating, making it the ideal mid-range solution for woodworking and manufacturing facilities.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 5 HP, 3-Phase (208-230/460V) or 1-Phase |
| Airflow Capacity | 2,000 CFM |
| Inlet Size | 10″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage Capacity | 30 Cubic Feet (Total) |
| Filter Area | 50 sq. ft. |
| Weight | 900 lbs. |
| Footprint | 24″ x 113″ x 76″. Easy to move as your shop scales. |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
The Dustek Model C300 is a high-performance, self-contained dust collection system engineered for efficiency in professional workshops. Powered by a 3 HP, 3-phase enclosed fan-cooled motor, this unit delivers a reliable 1,000 CFM rating, providing a compact yet powerful solution for targeted dust extraction.
Key Technical Specifications
| Feature | Specification |
|---|---|
| Motor | 3 HP, 3-Phase (208-230/460V) or 1-phase |
| Airflow Capacity | 1,000 CFM |
| Inlet Size | 7″ Opening |
| Impeller | Cast Aluminum, Heat-Treated & Hardened |
| Storage Capacity | 15 Cubic Feet |
| Filter Area | 25 sq. ft. |
| Weight | 600 lbs. |
| Dimensions | 24″ x 113″ x 46″ |
What’s Included?
**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.
Get started on a solution tailored to your needs, or explore our range of inline separators, self-dumping hoppers, and baghouses for even more ways to optimize your workspace.
