10" In-line Separator (RL Ends)

10" Sealed lid for Large Dumpster - Lid with 10" RL Connection

10" Sealed lid for Medium Dumpster - Lid with 10" RL Connection

12" In-line Separator (RL Ends)

12" Sealed lid for Large Dumpster - Lid with 12" RL Connection

12" Sealed lid for Medium Dumpster - Lid with 12" RL Connection

14" In-line Separator (RL Ends)

14" Sealed lid for Large Dumpster - Lid with 14" RL Connection

16" In-line Separator (RL Ends)

16" Sealed lid for Large Dumpster - Lid with 16" RL Connection

18" In-line Separator (RL Ends)

18" Sealed lid for Large Dumpster - Lid with 18" RL Connection

20" In-line Separator (RL Ends)

22" In-line Separator (RL Ends)

24" In-line Separator (RL Ends)

26" In-line Separator (RL Ends)

28" In-line Separator (RL Ends)

30" In-line Separator (RL Ends)

32" In-line Separator (RL Ends)

34" In-line Separator (RL Ends)

36" In-line Separator (RL Ends)

38" In-line Separator (RL Ends)

40" In-line Separator (RL Ends)

42" In-line Separator (RL Ends)

44" In-line Separator (RL Ends)

4" In-line Separator (RL Ends)

4" Sealed lid for Large Dumpster - Lid with 4" RL Connection

4" Sealed lid for Medium Dumpster - Lid with 4" RL Connection

4" Sealed lid for Small Dumpster - Lid with 4" RL Connection

5" In-line Separator (RL Ends)

5" Sealed lid for Large Dumpster - Lid with 5" RL Connection

5" Sealed lid for Medium Dumpster - Lid with 5" RL Connection

5" Sealed lid for Small Dumpster - Lid with 5" RL Connection

6" Fume Arm Standard Mount Bracket

6" In-line Separator (RL Ends)

6" Sealed lid for Large Dumpster - Lid with 6" RL Connection

6" Sealed lid for Medium Dumpster - Lid with 6" RL Connection

6" Sealed lid for Small Dumpster - Lid with 6" RL Connection

7" In-line Separator (RL Ends)

7" Sealed lid for Large Dumpster - Lid with 7" RL Connection

7" Sealed lid for Medium Dumpster - Lid with 7" RL Connection

7" Sealed lid for Small Dumpster - Lid with 7" RL Connection

8" Fume Arm Standard Mount Bracket

8" In-line Separator (RL Ends)

8" Sealed lid for Large Dumpster - Lid with 8" RL Connection

8" Sealed lid for Medium Dumpster - Lid with 8" RL Connection

8" Sealed lid for Small Dumpster - Lid with 8" RL Connection

9" In-line Separator (RL Ends)

End dragging or kinked flex hose connections on cutter heads and other moving equipment by installing a Ball Joint. The base swivels a full 360 degrees, letting the hose move freely above the machine while airflow stays steady. It's the simple fix for flex hose that keeps binding, sagging, or wearing out where your equipment moves, and it pairs well with swivel joints for even greater range of motion.

Rolled-lip end that connects to Quick Clamp Clamp-Together Duct (CTD) using quick clamps and gaskets, while the hose side connects in minutes with a simple worm clamp (not included). Fast to set up, easy to adjust, and quick to take apart for cleaning or relocation.

Features

• Rolled-lip end connects to Quick Clamp Clamp-Together Duct (CTD). The hose side uses a worm clamp (not included).
• 360-degree swivel base lets flex hose move freely with your equipment
• Pairs well with swivel joints for added range of motion

Industrial tubing ball joints and swivel joints easily connect tubing to flex hose. Eliminates kinked flex hose connections on cutter heads and other moving equipment. Base swivels a full 360 degrees, allowing the host to move freely above the machine while airflow stays steady. It's the simple fix for flex hose that keeps binding, sagging, or wearing out where your equipment moves. Easy clamp-together connections decrease install time by up to 70%. Hose side connects with a simple worm clamp (order separately).

Industrial tubing bell mouth fittings create a smooth, funnel-shaped entry point that reduces turbulence and helps maintain capture velocity at pickup points. Built for industrial tubing duct systems. Engineered to support consistent airflow across dust and fume collection systems.

Industrial tubing bell mouth fittings create a smooth, funnel-shaped entry point that reduces turbulence and helps maintain capture velocity at pickup points. Built for industrial tubing duct systems. Engineered to support consistent airflow across dust and fume collection systems.

Industrial tubing bell mouth fittings create a smooth, funnel-shaped entry point that reduces turbulence and helps maintain capture velocity at pickup points. Built for industrial tubing duct systems. Engineered to support consistent airflow across dust and fume collection systems.

The Buna-N O-Ring provides a reliable seal at tubing and fitting connections, offering solid resistance to oils, fuels, and general industrial chemicals. Buna-N (nitrile) is a standard-duty sealing material well-suited to mist and oil-exposed environments where a durable, cost-effective O-ring is needed.

Adjustable sleeves O-ring join duct sections and fittings, absorbing minor length variances so field installs go together without custom cutting. Built for rolled lip clamp-together duct systems. Available in galvanized steel and multiple gauge. Select from multiple gasket types.

Adjustable sleeves join duct sections and fittings, absorbing minor length variances so field installs go together without custom cutting. Built for clamp-together duct systems in stainless steel and multiple gauge. Select o-ring to match your application.

Rolled lip butterfly valves use a rotating disc to control or shut off airflow within a duct run, supporting system balancing across multi-branch dust and fume collection systems. Available in galvanized and stainless steel.

Clamp together rolled lip hose adaptors for leak-free transition points. Hose adapters are used to connect the duct to flex hose. One end of the adapter is typically rolled-lip and the other end is a raw end (approximately the size of the inside diameter, ID, of the hose) with an expanded bead knurled onto the adapter end—allowing 2" of adjustability. A worm clamp is used to tighten the hose to the adapter and the expanded bead keeps it from sliding off.

Cleaning and HEPA Fume Extractor with 6"-10' Fume Arm

Cleaning and HEPA Fume Extractor with 6"-8' Fume Arm

Cleaning and HEPA Fume Extractor with 8"-10' Fume Arm

Cleaning and HEPA Fume Extractor with 8"-8' Fume Arm

Cleaning Fume Extractor with 6"-10' Fume Arm

Cleaning Fume Extractor with 6"-8' Fume Arm

Cleaning Fume Extractor with 8"-10' Fume Arm

Cleaning Fume Extractor with 8"-8' Fume Arm

Closed Canister Barrel 18"x32" without window

Closed Canister Barrel 18"x32" with window

Flanged double branch fittings combines two branch takeoffs into a single component, tapping two secondary runs into the main line at once. This consolidates what would otherwise require two separate branch fittings into one connection point, saving install time and reducing the number of joints in the system. Available in 18 gauge galvanized steel standard.

Rolled lip double branch fittings combines two branch takeoffs into a single component, tapping two secondary runs into the main line at once. This consolidates what would otherwise require two separate branch fittings into one connection point, saving install time and reducing the number of joints in the system. Available in galvanized and stainless steel. Standard 18 gauge.

Strong stainless steel quick clamps with integrated EPDM gasket for clamp-together dust collection duct. Compatible with the following standard, heavy-gauge, and airtight duct systems:

• US Duct Quick Clamp Clamp-Together Duct
• Easy Duct
• KB Duct
• Nordfab
  

These premium Dustek 01-018 48" Cloth Filter Bags are designed for use on Dustek Models 300 and 500 or any similar dust collector featuring a 24″ diameter barrel. Constructed from seamless knit polyester, these bags provide a high-efficiency solution for a wide variety of woodworking applications.

Key Product Features

• Seamless Knit Polyester: Provides maximum breathability and increased airflow for peak system performance.
• Industrial Filtration: Delivers 99.5% to 99.9% efficiency at the 3-5 micron level.
• Unique Dust Escape Locking Cord: Dustek’s proprietary locking system ensures a tight, leak-proof seal at the connection point.
• Reinforced Durability: Features a double-reinforced bottom closure to prevent blowouts and extend service life.

Technical Compatibility

• Fits Models: Dustek C300, Dustek C500, and equivalent units with 24" barrels.
• Application: Suitable for a wide range of woodworking and industrial dust extraction.

Note: Please see included instructions for the proper “coating” procedure to ensure maximum filtration life.

These premium Dustek 01-020 60" Cloth Filter Bags are engineered for high-capacity systems, including Dustek Models 750, 1000, and 1500, or similar dust collectors with a 24" diameter barrel. These bags provide the durability and airflow necessary for demanding industrial woodworking environments.

Key Product Features

• Seamless Knit Polyester: Engineered for maximum breathability and significantly increased airflow.
• Precision Filtration: Achieves efficiencies of 99.5% to 99.9% at the 3-5 micron level.
• Dust Escape Locking Cord: Unique proprietary locking system ensures a leak-proof seal on the 24" diameter barrel.
• Double-Reinforced Bottom: Heavily reinforced closure to prevent blowouts under high-pressure industrial use.

Technical Compatibility

• Fits Models: Dustek C750, C1000, C1500, W750, W1000, W1500, and equivalent units with 24" barrels.
• Barrel Size: 24″ Diameter.

Pro Tip: For optimal performance, follow the included instructions for “coating” the bag before putting the system into full production.

Dustek 01-020U 72-inch Cloth Filter Bag for use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.

• Replacement Bag for Dustek Models 750, 1000 and 1500
  
• For a wide variety of woodworking applications
• See instructions for “coating” bag

These Dustek 01-022 96 Inch Cloth Filter Bags are engineered for the most demanding industrial applications. Designed for Dustek Models 2000 and 2500, or similar dust collectors with a 24"-inch diameter barrel. These bags provide the massive surface area required to maintain high-volume airflow in high-production woodworking environments.

Key Product Features

• Seamless Knit Polyester: Engineered for maximum breathability and significantly increased airflow.
• 99.5% to 99.9% Efficiency: Captures fine particulates at the 3-5 micron level for superior shop air quality.
• Extra Long 96" Profile: Maximizes filter area to support high-CFM industrial extraction.
• Dust Escape Locking Cord: Proprietary locking system ensures a secure, dust-tight seal on 24-inch diameter barrels.
• Double-Reinforced Bottom: Heavy-duty reinforced closure designed to prevent blowouts and extend service life.

Technical Compatibility

• Fits Models: Dustek C2000, W2000, W2500, and equivalent units with 24-inch barrels.
• Barrel Size: 24-inch Diameter.

Important Note: To ensure maximum filtration efficiency and bag life, please follow the included instructions for the “coating” procedure before initial use.

Dustek 01-034 60 Inch Teflon-Coated Filter Bags are for fine dust applications. For use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.

These 24-inch diameter special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.

The Dustek 01-035 72-inch Teflon-Coated Filter Bags are designed for fine dust applications. For use on a Dustek or similar dust collector with a 24-inch diameter barrel.

These special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.

The Dustek 01-036 96-inch Teflon-Coated Filter Bags are designed for fine dust applications. For use on a Dustek (or similar) dust collector with a 24-inch diameter barrel.

These special cloth filter bags have the inside treated with a Teflon material, which makes them superior for filtering fine dust.

Dustek Clamp-Type Strap to attach the upper cloth filter bag to Dustek (or similar) dust collectors with a 24-inch diameter barrel. 

Features

• Clamp-style bag retention
• Helps create a snug, secure connection
• Supports dependable bag positioning
• Replaces worn or damaged straps
  

Dustek aluminum impellers for the Classic Model dust collectors. Machined from high-quality 356-alloy aluminum. Dynamically balanced to eliminate vibration and heat-treated to T6 hardness for maximum strength and long service life. 

Replacing a worn or damaged impeller restores your collector's original airflow and CFM performance.

Dustek lower fabric collection bag for the DUSTY JR-31 mobile dust collector. The reusable lower bag mounts beneath the filter section to capture collected chips and dust, keeping the JR-31's self-contained, internal-return system running clean. 

Durable knit polyester construction; secure it with a JR-31 quick-release strap (sold separately).

***Sold as pairs

Disposable plastic collection bags for the Dustek DUSTY JR-31 dust collector. Collection bags catch chips and dust for fast, clean, no-mess changeouts.

***Sold in packages of 10.

Dustek quick-release strap for the DUSTY JR-31 mobile dust collector. The spring-loaded, over-center clamp locks the bag securely onto the JR-31's barrel and pops open with a single pull of the lever. No tools required.

A direct replacement for a worn, stretched, or missing strap so bags seal tight and swap out in seconds. 

Approximately 8" diameter x 2" wide.

Dustek upper cloth filter bag for the DUSTY JR-31 mobile dust collector. The upper bag filters exhaust air and returns clean, filtered air back into your shop. That is the heart of Dustek's internal-return design.

Made from seamless knit polyester for excellent filtration and airflow, with an elastic hem for a snug fit over the JR-31's upper frame. 

***Sold in sets of 2. 

Dustek Magnetic Clip assists with holding up collection bags during change-out. 

Magnetic controls with push-button start for Dustek Dust Collectors.

Available for all models!

Keep your workshop clean, safe, and compliant with the Dustek Model C1000 Dust Collector. Engineered for heavy-duty industrial use, this self-contained internal return system delivers a massive 4,000 CFM of airflow. Powered by a 10 HP, 3-phase, enclosed fan-cooled motor, it’s the ultimate solution for large-scale woodworking and manufacturing shops needing reliable, continuous operation.

Key Technical Specifications

What’s Included?

• (3) 60″ Filtration Bags with heavy-duty straps.
• (3) Plastic Collection Bags (15 cu. ft. capacity each).
• Quick-Release Straps & Magnetic Bag Holders for fast changeouts.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Model C1500 is a high-capacity, self-contained dust collection system built for the most demanding industrial environments. Powered by a 15 HP, 3-phase enclosed fan-cooled motor, this unit delivers a massive 5,000 CFM rating, providing a high-volume extraction solution for large-scale manufacturing and commercial woodworking facilities.

Key Technical Specifications

What’s Included?

• (4) 60″ Filtration Bags with heavy-duty straps.
• (4) Plastic Collection Bags (15 cu. ft. capacity each).
• Quick-Release Straps & Magnetic Bag Holders for fast, tool-free changeouts.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Model C2000 is the ultimate high-capacity, self-contained internal dust collection system designed for heavy-duty industrial environments. Powered by a massive 20 HP, 3-phase enclosed fan-cooled motor, this unit delivers a market-leading 7,000 CFM rating, providing a high-volume extraction solution for large-scale manufacturing and 24/7 production facilities.

Key Technical Specifications

What’s Included?

• (4) 96″ Filtration Bags with heavy-duty straps.
• (4) Plastic Collection Bags (15 cu. ft. capacity each).
• Quick-Release Straps & Magnetic Bag Holders for fast, tool-free changeouts.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Model C300 is a high-performance, self-contained dust collection system engineered for efficiency in professional workshops. Powered by a 3 HP, 3-phase enclosed fan-cooled motor, this unit delivers a reliable 1,000 CFM rating, providing a compact yet powerful solution for targeted dust extraction.

Key Technical Specifications

What’s Included?

• (1) 48″ Filtration Bag with heavy-duty strap.
• (1) Plastic Collection Bag (15 cu. ft. capacity).
• Quick-Release Strap & Magnetic Bag Holder for fast, tool-free bag changes.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Model C500 is a high-performance, self-contained dust collection system engineered for efficiency in professional industrial settings. Powered by a 5 HP, 3-phase enclosed fan-cooled motor, this unit delivers a consistent 2,000 CFM rating, making it the ideal mid-range solution for woodworking and manufacturing facilities.

Key Technical Specifications

What’s Included?

• (2) 48″ Filtration Bags with heavy-duty straps.
• (2) Plastic Collection Bags (15 cu. ft. capacity each).
• Quick-Release Straps & Magnetic Bag Holders for fast, tool-free changeouts.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Model C750 is a high-performance, self-contained dust collection system engineered for efficiency in industrial environments. Powered by a 7.5 HP, 3-phase enclosed fan-cooled motor, this unit delivers a powerful 3,000 CFM rating, providing a heavy-duty solution for mid-to-large scale woodworking and manufacturing shops.

Key Technical Specifications

What’s Included?

• (3) 60″ Filtration Bags with heavy-duty straps.
• (3) Plastic Collection Bags (15 cu. ft. capacity each).
• Quick-Release Straps & Magnetic Bag Holders for fast, tool-free bag changes.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek "DUSTY" Model JR-31 (previously the JR-30) is a high-efficiency, mobile dust collection system engineered for professional versatility. Powered by a 3 HP, single-phase TEFC motor, this unit delivers a powerful 1,200 CFM suction capacity, providing an industrial-grade solution for shops requiring portability without sacrificing performance.

Key Technical Specifications

Professional Grade Features

• TEFC Motor: The Totally Enclosed Fan-Cooled motor ensures internal electrical components remain dust-free for maximum service life.
• Magnetic Starter: Features a push-button magnetic starter for superior electrical protection and safety.
• Steel Impeller: The 12-inch steel impeller is built to withstand high-velocity debris that would damage standard plastic or aluminum fans.
• Full Mobility: Heavy-duty casters come standard, allowing the unit to be moved easily for temporary installations or layout changes.

What’s Included?

• (1) 32" Top Filtration Bag (30-micron rating).
• (1) Cloth or Plastic Collection Bag (24 cu. ft. capacity).
• Removable Triple-Inlet Manifold: For multiple machine connections.
• Mobile Caster Kit: For shop-wide portability.
• Operational Documentation: Complete manual and parts list.
  
  

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

Maintain a secure seal around your Dustek dust collector’s motor shaft with this motor shaft gasket. It fits around the shaft opening to help reduce air leakage, limit dust intrusion, and support consistent dust collection performance. 

Replace a worn, cracked, compressed, or missing gasket to help restore a proper seal between the motor shaft and housing.

Key Features

• Helps seal the motor shaft opening
• Reduces air and dust leakage
• Supports consistent airflow and suction
• Replaces worn or damaged gaskets
• Designed for compatible Dustek dust collectors
  

**Sold in pairs.

Make dust collector bag changes faster and easier with Dustek Quick Release Straps. Designed to secure collection bags to the collector housing, these straps provide a snug hold while allowing quick, tool-free removal and installation.

Features

• Quick-release design for easier bag changes
• Provides secure bag attachment
• Allows tool-free removal and installation
• Replaces worn or damaged straps
• 24-inch diameter

Dustek Rubber Barrel Gasket.

• PSA one side
• Pre-cut to fit around one barrel of machine

Keep your Dustek dust collector running strong with a genuine Toshiba EQP Global SD severe-duty replacement motor, matched to your unit and built to drop in and perform like the original. This listing covers both Dustek lines; just select your model and horsepower:

• Whispurr models run on 1800 RPM (4-pole) motors, which run quieter and cooler. The reason the Whispur line is known for low-noise operation.

• Classic models run on 3600 RPM (2-pole) motors for high-speed, high-airflow collection.

Every motor in this range shares the same rugged severe-duty build: a heavy Grade 25 cast iron frame, bearing brackets, and conduit box; a totally enclosed fan-cooled (TEFC) enclosure that seals out dust and moisture; NEMA Premium efficiency; Class F insulation; a 1.15 service factor rated to 40°C ambient; and oversized 300-series bearings on both ends for long, reliable service. 230/460V, 60 Hz.

Features

• Genuine Toshiba EQP Global SD (Severe Duty) motor
• Fits both Dustek lines: Whispurr (1800 RPM) and Classic (3600 RPM)
• Heavy cast-iron frame, brackets, and conduit box
• TEFC enclosure with strong dust/moisture protection
• NEMA Premium efficiency, Class F insulation, 1.15 service factor
• Oversized 300-series bearings
• 230/460V, 60 Hz

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

Dustek steel impellers for the Whispurr Model dust collectors. Fully welded from heavy-duty steel as material-handling fan impellers. Built to exacting ISO-9001 quality standards and engineered for the ultra-quiet, high-volume Whispurr series for maximum strength and long service life.

Replacing a worn or damaged impeller restores your collector's original airflow and CFM performance.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery. 

The Dustek Whispurr Model W1000 is an ultra-quiet industrial dust collection system designed for large-scale operations. Combining massive suction power with advanced noise-dampening technology, the W1000 delivers a powerful 4,000 CFM rating while maintaining a sound level near 70 dB. Powered by a 10 HP, 3-phase enclosed fan-cooled motor, it provides the ultimate balance of high-volume extraction and a quiet work environment.

Key Technical Specifications

The "Whispurr" Advantage: Heavy-Duty Power, Minimal Noise

The W1000 features the proprietary Whispurr impeller, dynamically balanced to eliminate the "industrial roar" typical of collectors in this power class. This award-winning design ensures that even at 4,000 CFM, your facility remains compliant with noise regulations and comfortable for your team.

What’s Included?

• (3) 60″ Filtration Bags with heavy-duty straps.
• (3) Plastic Collection Bags (15 cu. ft. capacity each).
• "HANDI-BAG" Integral Dispenser: Built-in plastic bag dispenser for seamless bag replacements.
• Quick-Release Straps & Magnetic Bag Holders for fast, tool-free maintenance.
• Complete Documentation: Operational manual and full parts list.

**This item ships via freight carrier on a pallet or crate. Shipping costs will be calculated based on your delivery address and invoiced separately after checkout. Additional fees may apply for liftgate service, residential delivery, or inside delivery.