Angle ring flanges, commonly known as angle rings, join ductwork together. Standard rings come punched with holes. Flange angle rings are available in Carbon Steel (Black), Galvanized Steel, and Stainless Steel.

Our Laser-Welded, Quick-Connect, Clamp-Together Ducting (CTD) reduces install time by up to 70%.

Connection adapters are used to switch from one connection type to another.

Trapeze-style cable hangers, or Gripple hangers, quickly suspend duct in a hammock-like setup. Ideal for supplemental support. One hanger per 10ft of duct.

Hose adapters are used to connect the duct to flex hose.

Durable self-dumping hoppers built with 10-gauge steel and powder-coated for longevity. Available in 3 sizes, perfect for effortless waste management on any site.

Machine adapters are made to adapt the duct to a machine.

Durable stainless steel clamps with integrated seal (available with O-ring) for rolled-lip dust collection duct systems. Compatible with standard duct systems.

T-branches are called Ts because the line enters the main line at 90 degrees—forming a 'T'—and are often used in positive systems where the air is being pushed.

Y-Branches are exactly that—Ys with the two inlets diverging from the centerline. Once again, the volume of the outlet is the sum of the two inlets.

In-Cuts are used to create a branch on an existing trunk line.

Floor Sweeps remove debris from the shop floor where clean-up is needed. Simply open the double-hinged door and sweep away your shop debris. When done, the dust collection system vacuum holds the door tightly closed to prevent system pressure loss.